kYNSHOT

The RB5022 is a specially engineered Hydraulic Buffer with dual stage damping for the Rock Island Armory VR80™ application. This is a
drop-in replacement for the standard buffer. The hydraulic fluid and seals are made to meet mil-spec requirements and have an
ambient temperature operating range of -30^oF to +150^oF. KynSHOT uses patented hydraulic shock absorption technology to
dampen the impact of the bolt at the rear of its travel and to dampen the forward impact of the buffer’s weight as it chambers the next
round. This buffers weight, damping, and length have been optimized for the VR80™ application so that it runs reliably, softens recoil,
smooths out the action, and reduces muzzle rise.

** VR80™ is a trademark of ARMSCOR Precision International, Inc**

Please Note The Following: 

1. If your VR80™ is brand new, before replacing the factory installed buffer with the KynSHOT buffer, we strongly reccomend firing a minimum 500 rounds to break in your VR80™ .
2. The KynSHOT buffer must be installed in accordance with the instructions included in then clamshell the buffer is shipped in. Failure to folllow instructions will void the KynSHOT warrantee.
3. KynSHOT recommends using the factory installed buffer tube as this is adjusted properly for your VR80™ to cycle properly.  KynSHOT currently does not recommend the use of other aftermarket buffer tubes with our buffer in the VR80™ platform. It is important that the factory installed buffer tube be set properly as recommended by your VR80™ OEM as this will affect the operation of the VR80™ with the buffer.